Need help planning a Crowdfunding PR or marketing campaign? Crowdfunding PR writes professional Crowdfunding press releases, social media plans and marketing programs for Crowdfunding Campaigns! Call us at (512) 627-6622 or see "Crowdfunding PR Campaigns" below!
It’s Foldable Fire Ring and Portable BBQ Grills are Currently on Fire on Kickstarter and have exceeded their crowdfunding goal by 1025% on the very first day as Tailgaters, Backyard BBQers, Car Campers, Glampers, RVers, Boondockers and Other Outdoor Adventurers Buy New BBQ Grills for the 2021 Camping Season
Raleigh, NC – TurboTrails.com announced today that the outdoor adventure gear company has rolled out a brand new bullet proof, portable heavy-duty steel #PakPit#BBQ#Grill and #foldable#firepit#ring that measures a mere 0.56″ thick when all 4 pieces are disassembled, stacked and packed in their rough and tough fireproof traveling bag.
The PakPit, Flat-to-Pack BBQ Grills are on sale NOW on Kickster.com while supplies last for the $75 Earlybird specials at => https://buff.ly/2Qv5gzV.
Its indestructible, hot-rolled steel plates are always an instant hit with tailgaters, campers, RVers, backyard BBQers and outdoor adventurers that are tired of buying cheap thin tin grills from Walmart, Home Depot and Lowes that burn out, rust out and wear out in a single season when used on a regular basis with hot fires that cause rapid rusting and oxidation.
Each of the four pieces of the PakPit are made from hot rolled steel that are 1/8″ thick. They will get hot and even glow red, but they will not melt or degradate. They are guaranteed to last longer than your lifetime. The PakPit will l probably be the last grill you ever have to buy because they are engineered to last.
When the cooking is done. They are easy to take apart, wash and scrub if needed, and stack perfectly on top of each other into a very slim profile that measures around 5/16’s of an inch. Once clean and cool they can be slipped into their travel bag. Their slim flat profile make them very easy to store in cabinets, closets; under RV, boat, car and truck seats or in the bed of trucks, car trunks and trailers. They make the perfect gift for every outdoor adventure guide or camping enthusiast that seems to have everything.
PakPit, flat-to-pack BBQ grills make the perfect firepit for beaches, city parks, state parks and the national forests that allow for dispersed or event camping, but do not have fire pit rings installed. They can be setup in less than 30 seconds. They can burn charcoal, firewood or setup to burn propane during burn bans.
The PakPits’ unique and patented design uses three sides that resemble the pakman video game character that slide together and connect to form a triangular base that lifts the fire off the ground so that it does not leave a burnmark trace on the ground, on wooden or rubberized picnic tables, or metal tailgates when used to grill out for a large group of friends. The round grill top fits perfectly into each piece’s carrying handle to provide a large integrated cooking surface area.
Once the cooking is done, leftover coals can be dumped into a tin cooking pan and completely extinguished with bottled water. We like to lean the hot metal plates against a rock and they will be cool enough to pack up in around 5 minutes. Their travel bags are fireproof so they can be put up while they are still warm without worries.
What is size is right for you?
Most people like to purchase the large 17″ PakPat complete with 26″ stand for backyard BBQs and firepits. It is the perfect solution for backyard BBQs for large parties, birthdays and sport tailgating events and has a 12-burger-at-one-time cooking capacity. People that travel prefer the smaller 13.5″ version unless they are traveling with a large family.
Works with Amazon Alexa, Google Assistant, Apple Siri, SmartThings and IFTTT with the Hub
Energy saving
Even the most eco-friendly air-conditioning consumes energy to cool your room. We can reduce energy consumption by minimizing temperature fluctuations in your room. Close the curtains to block out sunlight to keep your room cool.
Sun light sensor for keeping the room cool
The SwitchBot Curtain has a built-in sun light sensor to detect sunlight. This can help save energy by reducing the workload on your air-conditioning and heating. It can be set to automatically close during the day time in summer to block out the sunlight and keep your room cool. You can also have it automatically open during the day in winter to warm your room with sunlight.
Save energy with the solar panel strip add-on
You can also install the solar power strip add-on to charge the SwitchBot Curtain’s battery using sunlight, thus eliminating the need to recharge the battery. Don’t worry about “charging anxiety” on the SwitchBot Curtain. Install and forget!
Leverage technology to take care of the daily routines through automation and voice control. A “Lights Off” scene turns off the light and draws the curtains brighten the room naturally with sunlight. Or you can just say it “Alexa/Ok Google/Hey Siri, give me sunlight”.
Lifestyle automated with the Schedule feature
Healthy lifestyle
Maintain a regular light-dark cycle in your bedroom to keep your sleep-wake rhythm in sync with your circadian rhythm. The SwitchBot Curtain can be set to close at night and open when it senses daylight. Get better sleep and wake naturally to sunshine.
Wake up naturally to sunlight
Anti-theft
Set your curtains to close automatically when you’re out of the house to hide your valuables from prying eyes. Can’t remember if you closed the window? Check via our app and remotely close the curtains where necessary. Or set them to automatically open at regular intervals to give the impression that someone’s home.
Your curtain keeps the bad guy away.
Adapt your existing curtains instead of replacing them. We at SwitchBot are firm believers in retrofitting your home to create a smart home instead of replacing trusty old appliances or furniture that are still in work well.
Retrofitting is simple with SwitchBot Curtain. It only takes a few seconds to make your existing curtains smart. You have to see it to believe it.
Seeing is believing
The average price of a set of smart curtains is USD $1,000. The SwitchBot Curtain is way more cost-effective at a fraction of that price. You don’t just save money with the SwitchBot Curtain, you do your part for the environment by retaining your existing curtains instead of throwing it away.
We support 99% curtains
Some smart curtain solutions only support a single type of curtains. Others are too bulky or require tedious modifications to provide a power source.
The SwitchBot Curtain supports different track types such as U-rail and I-rail, and also rod types. It is also wireless. Just clip it on and you’re ready to go. It is that simple.
We even handle that “BUMP” for extendable rods and rails
Rods, retrofitted
The round rails allow the SwitchBot Curtain to glide smoothly along the rod. Just clip on the rails and you’re all set.
For those of you who have a longer rod with a bump where the rod extends, we’ve got that figured out. The SwitchBot Curtain is not affected by such bumps.
Install in seconds
URails, retrofitted
The SwitchBot Curtain has hooks for U-rail. It is simple to attach the respective hooks to the rails.
Install in seconds
IRails, retrofitted
The SwitchBot Curtain has hooks for I-rail. It is simple to attach the respective hooks to the rails.
Install in seconds
Open and close the curtain at your fingertip. We offer intuitive App control for iOS and Android, with weekly/bi-weekly updates following feedback from you. OTA firmware update is also available for better user experience.
Intuitive UI
Smart living is powered by your voice commands. Wouldn’t it be great to just say it?
“Alexa/Ok Google/Hey Siri, close my curtain please” (Hub is required)
Even with SwitchBot Curtain, you’d probably still instinctively draw the curtains by hand some times. When it senses you drawing the curtain, the SwitchBot Curtain will kick in and do the work for you. We call this Touch & Go.
SwitchBot Curtain makes even the conventional way to draw a curtain smarter.
A wireless remote button add-on for you to place anywhere.
Hold it or mount it. Your say.
Double-sided curtains are very common and we have been getting a lot of enquiries about how to use the SwitchBot Curtain with these. You could get two units and part the double-sided curtains from the middle. Or, you could try out this tip from the King of Retrofit! Attach the top curtains with a velcro strip or a strong clip so the curtains will move as one. Then install the SwitchBot Curtain on either ends to let it work its magic!
So your next question is probably where to find a velcro strip. Good news is, we believe so strongly in retrofitting that we will ship every SwitchBot Curtain with a velcro strip in the box as a standard accessory.
The SwitchBot Curtain is so small that it hides nicely behind your curtains. It will work in its own way without getting in your way. Likewise, we keep the sophisticated mechanism within the body of the SwitchBot Curtain, giving you fast and easy installation so you can enjoy the benefits it brings.
Google search “Robert Hoskins Crowdfunding PR” to see why Mr. Hoskins is considered one of the industry’s foremost crowdfunding experts that has amassed a huge social media following, which is dedicated to supporting donation-, rewards- and equity-based crowdfunding campaigns.
Kupper Mounts are the most affordable, compact, portable, secure, convenient and quick-to-install bike racks and can be mounted on any car, truck or SUV in the world, regardless of country
New York, NY – KupperMounts.com, a leading-edge, vacuum suction-cup bicycle vehicle rack manufacturer, announced as part of its crowdfunding campaign it is once again offering an opportunity to buy their popular vehicle bicycle racks at a 50-percent discount off their retail price of $199. The bicycle racks will be offered with Early-Bird discounts as low as $89 via the Kickstarter crowdfunding campaign, which lasts from March 5, 2019, until April 18, 2019, and can be purchased at https://5cd03312.kckb.st.
Kupper Mounts Vacuum-Powered Suction Cup Bike Racks Are Affordable and Compact Enough to Pack in Checked Airline Baggage
Engineering Strong Vacuum-Powered Suction-Cups in the World
Offering 450 pounds of vacuum-suction power, Kupper Mounts, the bicycle industry’s largest 9″ UV-resistant, maximum-grip rubber suction cups, are loaded with features and benefits. Its 9″ and 6″ flexible-mounting cups and its compact size make it great for travel. Unlike other bike racks that require an expensive trailer hitch or a luggage rack, Kupper Mounts can be mounted on any vehicle, anywhere in the world.
The strength and durability has been tested by leading biking gear publications such as GearJunkie which gave Kupper Mounts bike racks an in-depth product test and wrote the following article: Suction Cup Bike Rack – Testing the Safety of Kupper Car Mounts.
Watch Video: Kupper Bike Rack Mounts Features and Benefits
Extending Vacuum-Powered Suction-Cup Bike Rack Sales
Over the past 12 months, Kupper Mounts has and continues to build a network of independent sales reps and domestic/international distributors to deliver Kupper Mounts bicycle racks to bike shops, retail locations and bicycle customers throughout the United States, Canada, Greece, Mexico, Australia, Austria, Belgium, Brazil, China, Denmark, Finland, France, Germany, India, Indonesia, Ireland, Israel, Italy, Japan, Netherlands, Norway, Philippines, Poland, Russia, Slovenia, South Korea, Spain, Sweden, Switzerland, Ukraine, United Kingdom and other international markets.
Offering Volume Purchasing Discounts to Bicycle Dealers
In addition to consumer pricing for the Kickstarter campaign ranging from $99 to $199, attractive pricing is being offered to bike shops and high-volume independent bike dealers (IBD) in 10-packs for $990, 20-packs for $1,850, pallets (72-units) for $6,500 as well as container-based pricing.
Google search “Robert Hoskins Crowdfunding” to see why Mr. Hoskins is considered one of the industry’s foremost crowdfunding experts that has amassed a huge social media following, which is dedicated to supporting donation-, rewards- and equity-based crowdfunding campaigns.
Electronics module easily clips in and out and is equipped with a dedicated smartphone pocket, a padded tablet compartment, a documents pocket, 2 mesh pockets for all your small items
“We can’t wait to deliver the bags to you,” said the creators of EZ_Duffle, Jean-Francois and Michael Holuigue. The duo is already overseas at their manufacturing facility, addressing final product refinements and setting up quality control logistics to get production underway.
Offering both daily and air travelers a versatile bag with 30-plus smart features and 22 compartments designed to carry everything from clothes to electronic devices, the creators thoughtfully designed their product to be the most versatile bag on the market today.
Travelers can save time on packing and never worry again about how to pack, what to put where, and how to organize everything they need for their trips.
“Say no to wrinkled clothes, crumpled papers and beat-up gadgets,” said Jean-Francois Holuigue, who co-founded Torba, the company that developed EZ_Duffle. “Grab what you need, when you need it, period.”
Backers agree EZ_Duffle is the perfect adaptable carry-on luggage with 22 compartments designed for everything from clothes to electronic devices
EZ_Duffle features include:
22 compartments with numerous interior mesh pockets
A multi-purpose garment strap
Two padded side modules for electronics and accessories that allow people to easily organize their items – with easy-to-open magnetic flaps that are both secure and easily accessible
Spill-proof toiletry pockets
A vented laundry compartment that keeps worn, smelly clothes separate from other packed items
A storage sleeve that doubles as a washable shoe bag or an extra laundry bag
A dedicated space for a 15″ laptop
Built-in interior LED lights in the side- and middle-compartments
A dual-zipper main opening that gives an unencumbered view of everything inside
Three distinct carrying options: briefcase style, over-the-shoulder with an ergonomic seven-position shoulder strap, or backpack-style using its adjustable chest strap
Scratch-resistant PU exterior shell, YKK waterproof zippers and a shock-resistant base – making the bag’s exterior 100-percent water resistant.
When travelers need extra space for shoes, jackets and other large items, EZ_Duffle can be configured without side modules. Also, for instant access to hats, shirts, and other garments stored in the main compartment, EZ_Duffle provides a quick-access flap on top – doubling as a “grab n’ go” solution for items in the spill-free toiletry pocket.
EZ_Duffle is also designed to allow the interior to be partitioned in three unique ways: into three compartments for short trips, using the main chamber for clothes and two side modules for electronics and accessories, using all EZ_Duffle’s space by detaching both side modules when getting ready for sports or other activities that require bulky items, or detaching one side module for a two-compartment configuration.
EZ_Duffle can also be purchased with an optional 10,000 mAh battery, featuring Quick Charge, universal compatibility (USB-c, lightning, micro-USB), and connection to the smart pocket located at the top of the bag, for charging smartphones, tablets and other electronic devices while on the go.
Google search “Robert Hoskins Crowdfunding” to see why Mr. Hoskins is considered one of the industry’s foremost crowdfunding experts that has amassed a huge social media following, which is dedicated to supporting donation-, rewards- and equity-based crowdfunding campaigns.
San Francisco, California – Amabrush is the world’s first, fully automatic toothbrush and is cleaning up with its current Kickstarter crowdfunding campaign goal having raised €910,000 from 7,900 backers. This patent-pending dental device brushes all your teeth at once, fully automatic, and finishes in just ten seconds. All you have to do is press a single button, wait ten seconds, and you’ll have perfectly clean teeth! You never have to brush your teeth again!
Amabrush is the world’s first, fully automatic toothbrush that brushes all your teeth at once, fully automatic, and finishes in just ten seconds
With Amabrush’s App for iOS & Android, you are able to connect to your Amabrush unit via Bluetooth at no additional cost and make use of various possibilities. You can set different vibration mode such as gum massage, whitening, burst mode, configure cleaning time, reorder replacement parts and do many things more!
Let’s face it: brushing your teeth is not exactly the sexiest thing on Earth. You have to squeeze, scrub, gargle, spit, rinse and floss every morning and evening, every day of your life. Many of us hate brushing our teeth so much that we avoid doing so whenever possible—even though we know we shouldn’t.
Brushing our teeth at least twice a day maintains good dental health. This is why we invented Amabrush—a device three years in the making with a single goal: to make toothbrushing quicker, automatic, and more efficient so you have more time for the relevant things in your life.
Amabrush is not meant to be better than your regular toothbrush. Wait, what? That’s true! Regular toothbrushes (manual and electric) are tools. And tools are only as good as the person using it! The key thing is that most of us use them wrong, or even worse, are not using them at all.
Brushing teeth is a job where you must be highly concentrated. Toothbrushes should be held like pencils, so that pressure is as light as possible. The bristles should be soft, in order to not damage your gums. And you should just wiggle the toothbrush with subtle vibrations, instead of doing long strokes. Electric toothbrushes are handled differently than manual ones. With them, you shouldn’t stroke at all. These toothbrushes are designed to be held in place, so that the micro vibrations of the bristles can do their job (they wiggle for you).
Amabrush covers all of the recommended methods. The bristles are aligned in a 45° angle against the gum line, and are soft enough in order to rub instead to scratch (like nylon bristles). And the pressure against your teeth is light. Subtle vibrations move the bristles back-and-forth, which allows them to remove plaque and keep your gums undamaged.
Amabrush was designed to make toothbrushing less annoying. Some of us hate toothbrushing so much, that we brush not concentrated enough, not long enough, not good enough, or not at all. And some of us simply can not brush correctly at all, because they are not able to do so. This is our goal. Right toothbrushing for everyone and automatically!
Amabrush’s Antibacterial Material
The flexible mouthpiece has built-in micro-channels that transport the toothpaste to your teeth. The mouthpiece is made of antibacterial silicone that kills 99.99% of all bacteria and features 3D-arranged bristles on both sides to clean your teeth. It’s soft enough to prevent gum damage but strong enough to clean your teeth precisely. It can be cleansed by normal rinsing, as you would do it with regular toothbrushes.
Amabrush’s Brushing Technique
The bristles are directed in a 45° angle against your gingival cuff. This simulates the Bass method, which is recommended by dentists and experts. The bristles are comparable to soft-bristled toothbrushes. This ensures the most comfortable, safest toothbrushing and makes gum-damage impossible. We work closely with dentists and dental universities to address two concerns: clean teeth and no gum damage.
Amabrush’s One-Size-Fits-All
We analyzed over 2,000 different jaws from adult females and males. The small difference between both genders is smoothed out by the flexible material of the mouthpiece. The used material has the characteristic to fit every jaw with no abnormal teeth displacements.
Google search “Robert HoskinsCrowdfunding PR” to see why Mr. Hoskins runs one of the industry’s foremost crowdfunding PR, social media and marketing agencies that has amassed a huge social media following and is dedicated to supporting a wide variety of donation, rewards and equity crowdfunding campaigns.
New B2v2 headband helps relax and rebalance brain waves to reduce stress, improve quality of sleep and enhance emotional well-being
Utilizing Brain State’s proprietary software, the B2v2 converts an individual’s unique brainwaves from both frontal poles and temporal lobes into corresponding music-like tones, recognizing out-of-balance brainwaves measured in real time. The wearable headband relaxes the brain by rebalancing brainwaves for stress relief and improved sleep, resulting in increased energy, more focused performance and significant enhancement of a client’s overall emotional well-being.
The new B2v2 technology is designed to help over 60 million Americans suffering from sleep deprivation and high stress levels. More than 122,000 users have been helped through Brainwave Optimization® since its introduction in 2004.
According to Lee Gerdes, Brain State CEO “Stress affects emotions, behavior, thinking ability and physical health. B2v2 helps the brain reset itself reducing the negative effects of stress. B2v2 supports the brain to move back to a naturally balanced performance pattern by reflecting each individual’s unique brain waves. It’s unlike any other technology ever developed.”
Gerdes added, “No two brains are alike. After using the B-2 over time, a user’s brain actually becomes more resilient to maintaining improvements, even when not using the device, which simply helps the body’s most important organ to self-correct and balance its circadian rhythms. The B-2 is non-invasive and users don’t have to sleep with it on.”
Thousands of current loyal users of the B-2 headband will receive a $200 discount for their B-2 headband only upgrade during the Kickstarter campaign.
Google search “Robert Hoskins Crowdfunding” to see why Mr. Hoskins runs one of the industry’s foremost crowdfunding PR, social media and marketing agencies that has amassed a huge social media following and is dedicated to supporting a wide variety of donation, rewards and equity crowdfunding campaigns.
Dublin, California – After launching a crowdfunding campaign on Kickstarter less than a month ago, Wavepod Technologies now offers Homsecure, a smart device allows users to upgrade their home security systems using smart technology at a more affordable price than competitors. Homsecure allows users to stay more connected with the status of their home, and requires very little setup.
Homsecure is a smart WiFi device that connects your existing home alarms and provides alerts on your phone when you are away
“Our friends and family are already using Homsecure, all with great results!” said Sundeep Chauhan, CEO of Homsecure. “In the process, we have established partnerships locally and abroad to enable us to successfully manufacture Homsecure.”
Having a secure and safe home is invaluable. Homsecure creates an added sense of security using smart technology and notifying owners when something goes wrong. Not only will consumers feel more at ease about the status of their home when they are away, but Homsecure also works seamlessly with existing alarms. This means installation is easy and allows for all of the benefits of smart technology, without the need to replace the entire system.
Integrating pre-existing alarms ensures that Homsecure is fully equipped to keep a user’s home safe while also maintaining assurance. Leaving the home can be hard for certain people. This device is able to give homeowners peace of mind. Additionally, in case of power outages, internet connection issues, or tampering, Homsecure is computerized to send notifications immediately.
Cheaper than other alternatives currently on the market, Homsecure only requires one device to fully function throughout the entire home. Companies like ADT charge hundreds of dollars a year for the same capabilities that Wavepod Technologies has created through this device.
The team has been working extremely hard to ensure Homsecure is not only a concept, but an actual product. Wavepod Technologies has already developed both an iOS and an Android app, a cloud platform on Amazon Web Services (AWS) and successfully manufactured the final design prototype. In the process, they have established partnerships locally and abroad to enable them to successfully manufacture Homsecure.
Google search “Robert Hoskins Crowdfunding” to see why Mr. Hoskins runs one of the industry’s foremost crowdfunding PR, social media and marketing agencies that has amassed a huge social media following and is dedicated to supporting a wide variety of donation, rewards and equity crowdfunding campaigns.
Fulton, Maryland – FitForLaunch announced the launch of its new platform for crowdfunding pre-orders. FitForLaunch is unique in that it offers consumers peace of mind with a delivery guarantee, so that they can pre-order the coolest tech without any risks. Should a business fail to deliver within 12 months, FitForLaunch will either refund their purchase or secure an equal or better replacement.
FitForLaunch.com Launches Rewards Crowdfunding Campaigns for Enomad, Knops, M3 and Snapmaker
Every company that joins FitForLaunch undergoes a thorough vetting in 5 key areas: Market feasibility, technical feasibility, production feasibility, financial feasibility and creator feasibility. Each key area is evaluated by a team of subject matter experts; only companies that are viable in all key areas are permitted to join the platform and considered fit for launch.
FitForLaunch debuted in June 2017 with four companies (M3D, Snapmaker, Knops, and Enomad) that have already had successful crowdfunding campaigns representing a total of $8.2 million raised for product development. FitForLaunch expects to add a dozen additional vetted companies every month and aims to help them increase pre-order revenues by addressing new markets.
FitForLaunch companies also benefit by having access to strategic advice in areas of marketing, manufacturing, employment, and even taxes. Helping companies learn how to keep their costs down and have sound strategies maximizes their chance of success. FitForLaunch’s experience allows us to help companies avoid pitfalls and save hundreds of thousands, if not millions. A short conversation with an expert can have a huge impact and is an additional value for companies joining the platform.
FitForLaunch encourages companies with new products to take pre-orders using a crowdfunding-type mechanism as opposed to setting up their own ecommerce site until they are in stock. Leveraging a platform like FitForLaunch also helps protect them from fraud, chargebacks and merchant processor holdback reserves. Many creators do not realize that credit card processors have the potential to devastate a startup by denying them access to the funds they’ve raised. New companies also may lack the resources for setting up their own ecommerce site and maintaining it along with screening purchases against fraud and dealing with chargebacks.
FitForLaunch was born out of witnessing failures that were predictable due to our fundamental understanding of the crowdfunding space and experience with manufacturing operations. We saw trust in the crowdfunding space falling and wanted to do something about it. We developed a proprietary system for predicting success – our own underwriting process for gaging risk. We then surveyed buyers and found an underserved market of purchasers that would pre-order projects only if given a guarantee, even with a significant additional fee. FitForLaunch was then setup as a way to effectively communicate and support our own vetting and guarantee process.
Google search “Robert Hoskins Crowdfunding” to see why Mr. Hoskins runs one of the industry’s foremost crowdfunding PR, social media and marketing agencies that has amassed a huge social media following and is dedicated to supporting a wide variety of donation, rewards and equity crowdfunding campaigns.
The Ambi Climate uses artificial intelligence (AI) software to generate temperature and humidity profiles and then collects and learns from actual user comfort feedback via a smartphone app to develop real world, year round profiles
Hong Kong – Optimizing AC use is not an easy task, which is why the Ambi Climate 2 makes use of artificial intelligence to personalize ambient conditions. Apparently, a lot of people loved the Ambi Climate unit’s value-added business proposition so much that Ambi Labs raised over HK$1,215,900 from 1,016 backers via its Kickstarter crowdfunding campaign that ended on June 22, 2017.
The Ambi Climate that Draws on Data from Sensors and User Feedback to Automatically Tweak a Room’s Ambient Temperature and Humidity
The Ambi Climate was created by Ambi Labs, a Hong Kong-based company founded by Julian Lee, Paul Sykes, and Tim Chang. They state their mission as being a sort of ‘leave no man behind’ approach to technology, wherein aged appliances are given a makeover using modern innovation. With the second edition of the Ambi Climate, the aim remains to make air conditioners more energy-efficient and customizable.
The device achieves that with the help of AI software, which studies user comfort and the corresponding conditions to create unique profiles for them. It finds out how comfortable a user is at any given time via a mobile app, where you can tell the device how much its estimation of your comfort level differs from what it actually is. As you do that over different months and passing seasons, the AI learns your individual preferences and optimizes the temperature accordingly.
While user feedback is one way the Ambi Climate tweaks its own operation, it isn’t the only way. The device uses a variety of sensors to track such factors as humidity and sunlight. It also gathers data from the Web to understand weather trends during that time of year, clothing people are most likely to have on, and temperature variations at different times of the day. It uses all this information to deliver the most appropriate climate control automatically. According to the creators, that leads to as much as 30 percent savings in power bills.
Ambi Climate can be paired with air conditioners using the Ambi Climate App, which is available for Android and iOS users. Once that’s done, you can place the device in view of the AC and leave it to do its thing. The app also enables a geo-location feature; the Ambi Climate finds out when you’re about to get home and fires up the AC, so conditions are perfect as you walk in. You can tie those features in with other smart home IOT paraphernalia thanks to IFTTT and Amazon Alexa integrations.
Google search “Robert Hoskins Crowdfunding” to see why Mr. Hoskins runs one of the industry’s foremost crowdfunding PR, social media and marketing agencies that has amassed a huge social media following and is dedicated to supporting a wide variety of donation, rewards and equity crowdfunding campaigns.
Fort Lauderdale, Florida – Scott Mobley, firefighter and creator of the first Lobster Deveining Tool, is launching his first Kickstarter crowdfunding campaign on Saturday, July 1, 2017. Mobley has created the first ever tool to devein lobster safely, quickly, and more efficiently than any other method. He has appropriately named his company “D Vein.”
Scott Mobley demonstrating how simple it is to prepare lobster using the Lobster Deveining Tool
As a fire fighter from Broward Sheriff’s Office Fire Rescue, Mobley has learned to cherish every day and make it count, as it could be his last. On his days off, Mobley enjoys fishing and diving, especially for lobsters. Since he was young, Mobley dreaded cleaning spiny lobsters with their broken antennae the old-fashioned way and now, 20+ years later, Mobley has created the first Lobster Deveiner designed to remove the intestinal tract without the hassle.
Mobley was inspired to create this one-of-a-kind tool from his love of fishing and catching lobster. This is the very first product ever invented to devein and properly clean lobster.
The Lobster Deveiner Tool is currently the only tool on the market that can quickly and effectively clean any lobster properly. This tool is patent-pending and works great and has been getting outstanding reviews and the feedback from all of the people in the lobster fishing business that have seen it.
“Let me just say, the days of dreading cleaning the lobsters we catch are long gone. Some people might just say, ‘Why not just use the free antennae?’ You could, but if you clean as many lobsters as we do, we recommend buying the $8 lobster cleaning tool. It is just so much faster, easier and more dependable than using a broken antennae.”-B. Jax
“Saves a lot of time, works really well. Greatest invention yet for lobster season.”- LA Livin
Does your Crowdfunding Campaign need a social media, PR or email marketing boost? Our Crowdfunding PR Blog reaches 55,000+ blog readers plus a network of 295,750+ social media contacts for a combined total of audience of 350,000+ advocates who support crowdfunding campaigns.
Crowdfunding PR, Social Media & Marketing Campaigns 
You must be logged in to post a comment.